- Softraid lite easy setup for mac#
- Softraid lite easy setup serial#
- Softraid lite easy setup driver#
- Softraid lite easy setup software#
- Softraid lite easy setup mac#
Softraid lite easy setup serial#
Disk tiles display key disk information, such as the bus a disk is connected to, its serial number, power on hours, I/O errors and when a disk is predicted to fail. It displays active links between disks and volumes. Informative SoftRAID user interface – The SoftRAID Lite interface is both easy to use and informative. Validation is an important feature when hardware begins to fail and the user wants to ensure that valid copies of data exist on all disks. Mirror volume validation compares the data on all disks to guarantee that all data is identical on all disks. Stripe volumes are tested for readability across the entire volume to ensure data is readable. Volume validation – SoftRAID Lite can validate any volume. Rebuilds that would otherwise take many hours to rebuild typically take just a few minutes.
Softraid lite easy setup driver#
This enables the SoftRAID driver to just rebuild the portion of a volume that has changed since a secondary disk was last connected. Off-site secondary disks are great for archiving mission critical data.įast mirror rebuild technology – The SoftRAID Lite driver tracks when it writes to disks. When an off-site disk is connected to the system, SoftRAID will automatically rebuild it to the volume. Support for off-site secondary disks – A SoftRAID Lite mirror volume can have multiple online and off-site disks. Stripe volumes will scale performance up to the hardware limits of the computer, while mirror volumes can have multiple copies of the primary disk, greatly increasing data availability and reliability. Support for up to 16 disks per volume – Both stripe and mirror volumes can comprise up to 16 disks. The primary disk is used as the ‘gold reference’ for rebuilding or any time a volume is marked out of sync. This allows the SoftRAID driver to ensure data integrity in the event of a crash, or when disks are removed for off-site storage. Primary/Secondary disk implementation – SoftRAID mirror volumes always have a designated primary disk, and one or more secondary disks. SoftRAID Lite provides advantages over disk utility RAID There are multiple testimonials from users on the SoftRAID website attesting to this.
Many SoftRAID users have discovered that brand new disks fail the certification process! In fact, SoftRAID estimates 3-5% of all new disks will fail the initial certification test. A disk certification is considerably more rigorous than testing at the factory, providing users confidence that all the disks in their array are safe to use. SoftRAID Lite offers disk certification a thorough, multi-pass certification procedure that writes, then reads from every sector on the target disk. SoftRAID Lite continually watches for key disk failure indicators using proprietary predictive failure analysis, and in doing so, can reliably predict most catastrophic disk failures up to several weeks and even months in advance, so users can backup and protect their data before a disk fails. This means users are always aware of the status of the individual disks in an array, which helps to protect user data. If any SoftRAID disk has an I/O error, or fails the SMART test, the SoftRAID Monitor will change the color of the indicator in the menu bar and display a desktop notification. The SoftRAID Monitor runs continuously in the background, providing ongoing status of SoftRAID Lite arrays and alerts users to imminent disk failures. In addition to enhanced performance, SoftRAID Lite features comprehensive disk-health monitoring tools including SMART diagnostic tests every 24 hours, tracking hours of use for every disk, and performing block-level health analysis. SoftRAID Lite RAID-1 volumes can read at speeds in excess of 700MB/s using solid state disks (SSDs) and in excess of 270MB/s using HDDs. By spreading the reads over multiple disks, reads from mirrored volumes now approach the speed of striped volumes. Reads from SoftRAID Lite mirror volumes (RAID-1), are up to 86% faster than AppleRAID.
Softraid lite easy setup mac#
SoftRAID Lite volumes are bootable and can be used on any Mac running OS X 10.6.8 (Snow Leopard) or later.
Softraid lite easy setup software#
SoftRAID Lite comes to the rescue, restoring software mirroring (RAID-1) and striping (RAID-0) functionality to the Mac, while adding the advanced disk health monitoring of the SoftRAID engine.
Softraid lite easy setup for mac#
SoftRAID Lite makes it easy for Mac users to once again create and manage software RAID-0 and RAID-1 arrays.Īpple OS X 10.11 (El Capitan) removed the RAID functionality in Disk Utility, leaving a gap in functionality for users that want to create and manage software RAID volumes. SoftRAID LLC announced the SoftRAID Lite, a software RAID utility powered by the SoftRAID-5 engine.
0 kommentar(er)
